B. BLADE/BUCKET REPLACEMENT OR REPAIR

• 1. Remove worn blades, fit, machine and install new blades.
• 2. Punch, fit, peen and machine covers/shrouds.
• 3. Repair crack indications, erosion, or physical damage.
• 4. Replace worn stellite erosion shields with new.
• 5. Replace covers/shrouds and machine.
• 6. Reweld tenons, recontour and fit to new shrouds.

• Weld repair stationary blades in place
• Install new seals and machine to size
• Repair blade carriers
• Weld repair washed out seal gloves

• Install new blades
• Replace tip seals
• Remove and replace studs
• Repair joints to seal properly